WRAG Basic XL300 Springless POST POUNDER, DRIVER w/Rock Spike: 110,000lbs Force

Description

WRAG Basic
XL300, Commercial Duty 3-Point Post Driver
(SSQ/A Adaptable) with Pilot Hole Rock Spike
: Quick Hitch Compatible,
Self-Contained, Springless, 90° Swing, 4-Way Hydraulic Tilt, Telescopic Offset & Hydraulic Power Leg!
This Driver Is Temporarily Back-Ordered, Though We Are Taking Advance Orders!
Expect This Post Driver & ALL Of The Equipment We Sell To Be Quality Equipment That Will Serve You Well For A Lifetime And Provide A Good Resale Value Too!
GENERAL FEATURES:
In Addition To Hydraulic (left & right) Tilt Adjustments & 110
,000lb's of 'Springless' Driving Force, this WRAG Driver is Also Self-Contained!
Pilot Hole Rock Spike & Hydraulic Extractor Kit with 4" Tip.
The Self-Contained Feature Eliminates the Need to Run a Hydraulic Return Line Hose to the H
ydraulic Reservoir Filler Neck (usually in the
engine compartment)!
The Springless Feature Eliminates the Maintenance & Seasoning of Springs, the Expensive Replacement Cost of Them & Also Eliminates the Unexpected Down Time Caused by Broken Springs!
Plus,
the Unique Springless, Drop Weight Type of Hammering Action, Makes This the Most Stable Driver Available - Again Contributing to Efficiency & Straight Posts!
4-Way (Front & Back) Tilt Adjustment is Hydraulic.
90° Swing is From Rear Center Mounted Position to Right of Tractor (rotating counter-clockwise).
Horizontal Telescoping Feature offers 14-1/2" of Adjustment in Any Location of the 90° Swing.
Hydraulically Telescoping Power Leg Makes Height Positioning a Piece of Cake!
Rear, Manually Adjusted Rear Stabilizer Legs are Standard & Work in Conjunction with the Telescoping Power Leg.
All of the Unique & Easy to Use Positioning Features Assist in Driving Straight Posts & They Eliminate the Need for Constantly Re-positioning the Tractor to Achieve Precise Placement of the Driver & Post, Providing an Overall Operation Efficiency!
WRAG Multi-Lever Controls are Always Placed in Safe Locations, Convenient for Access & Visibility!
Expect the Industrial Poly/Cotton Braided Rope to Have a Very Long & Trouble Free Service Life, and to be Safe & Easy on Your Hands!
This Unique Driver is Also Void of Cables & Hinged Masts, Which are More Maintenance Points & Which
Can
Work Against the Operator!
Also, Since the Post is not Nested in the Webbing of an 'I' Beam (as w/most Drivers), This WRAG Driver Enables Filling an Existing Fence Line with Posts, w/o Stretching or Damaging the Existing Fence!
Driver Includes the Following:
Hydraulic Hoses & Couplers.
Driver is Shown on an 'LS' Tractor for Reference Only - Tractor is Not Included.
SPECIFICATIONS:
Minimum Hydraulic Requirement is 15GPM/1800PSI.
Maximum Post Diameter 10".
Functionality Dimensions:
Horizontal Telescoping & Offset (Travel Range is 14-1/2"):
Center of 3-Pt Frame to Center of Post Cap, Retracted is 57".
Center of 3-Pt Frame to Center of Post Cap, Extended is 71-1/2".
For 15" more hydraulic offset, see the
Commander XL300.
Driver Legs Fully Extended:
Drives Maximum 9' Long Post.
Drives Down to +/- 30" Above Grade.
Driver Legs Fully Retracted:
Drives Maximum 8' Long Post.
Drives Down to 18" Above Grade.
Above Spec's for Post Lengths & Above Grade Positioning are Conservative & Subject to Tractors 3-Point & Tire Sizes.
Above Spec's are as Measured on an 80hp Tractor w/30" Rear Tires, Lift Links Mostly Extended.
Hammer Weight is 660lb's.
Impact at Full Stroke is 110,000lbs.
4-Way Tilt Adjustment (left/right-front/rear) is About 22°.
Tilt Adjustment Can be Used in Any of the Other Articulated Positions!
Horizontal Swing is 90° and is Complimented with the Horizontal Telescoping Feature!
Weight is 2196lbs with Rock Spike Kit.
Specifications are based on manufacturer provided data & subject to change.
Provide Us With Your Zip Code For A Quote Of Our Affordable Nationwide Shipping Prices!
TYPICALLY IN STOCK, BUT YOU'RE WELCOME TO CHECK ON AVAILABILITY!
Farm Equipment 24-7
eBay Store of
Iowa Farm Equipment
A FULL SERVICE DEALERSHIP
Providing Parts & Warranty Coverage Nationwide!