JH-62 Flue Gas Analyzer Third-Party Tester Flue Gas Comprehensive Analyzer tzt*

Description

Description
JH-62 Portable Flue Gas Analyzer Third-Party Testing Unit Industrial Flue Gas Comprehensive Analyzer
Application:
This instrument is suitable for industrial site flue gas measurement. It provides electrochemical sensor method to measure gas concentration. It can measure O2, SO2, NO, NO2, H2S, CO, CO2 and other gas concentrations in real time. It can measure flue gas pressure and static gas pressure, flue gas temperature, calculate flue gas velocity, flow and standard dry flow.
It can be used by departments of health, labor, safety supervision, military, scientific research, education, etc. to determine the emission concentration/total amount of flue gas from various boilers and kilns and the desulfurization efficiency of equipment.
Performance Features:
1. Mold forming process, simple operation, small size, light weight, compact structure and easy to carry.
2. Oxygen content sensor is integrated to display oxygen content and calculate excess air coefficient (basic type).
3. Automatically memorize input parameters each time, and automatically adopt it next time the machine is turned on, realizing one-key sampling.
4. Imported wide-temperature OLED display, automatic backlighting, good human-machine interface with graphics and texts, no need to adjust contrast, and can work in low temperature and low illumination environments.
5. Imported flow sensor is used to automatically monitor the working flow of sampling pump, and automatically adjust the power of the sampling pump according to the pressure in the flue, so that sampling flow is always constant.
6. Imported pressure sensor and imported electrochemical sensor are used for more accurate measurement results. Electrochemical sensor and signal module are integrated. No calibration is required to replace the sensor, and it has temperature and linear compensation and cross-interference correction functions to ensure measurement accuracy.
7. It can measure SO2, NO, NO2, CO, CO2, H2S (optional) and other harmful gas emission concentration and converted concentration.
8. Built-in large-capacity rechargeable battery, which can continuously work for more than 8 hours without AC power. After the AC power is connected, the instrument automatically charges the battery and has a real-time clock.
9. Equipped with a hand-held flue gas preconditioner, which can perform dust removal and dehydration treatments on flue gas to ensure long-term measurement accuracy (the simple sampling tube damages the sensor and causes the sensor to age in advance, and SO2 and other gases are absorbed by the condensed water. Cause the measurement result to be low).
10. The combination of small volume, large flow flue gas diaphragm sampling pump and electronic flow meter realizes adjustable flow and constant flow sampling.
11. Integrate measurement of various gas, flue temperature, flow rate, flue gas flow and other working conditions parameters, one machine with multiple uses.
12. The upper exhaust design of exhaust gas effectively solves the blockage caused by lower exhaust and the damage to the instrument caused by exhaust gas discharged in the instrument.
13. The instrument's various parameters can be linearly calibrated directly through waterproof keyboard. Password must be input for instrument maintenance and calibration to ensure the instrument parameters.
14. Real-time display and direct reading of dynamic pressure, static pressure, temperature, smoke temperature, flow rate, flow rate, speed and other parameters, and automatically measure atmospheric pressure.
15. The instrument has its own storage function, which can store 10,000 sets of data, and can use micro printer to connect to RS232 to print sampling reports on site. You can also use USB memory or memory card to store, connect to a computer to print data reports.
Technical Parameters:
- Sampling flow: Range: 0.1L/min～2L/min, factory setting is 1 L/min
- O2 (standard configuration): Range: (0～30)%; Resolution: 0.10%; Accuracy: Indication error
- SO2: Range: (0～5700/displayable value 14000)mg/m3; resolution: 1mg/m3; accuracy: better than ±2.5
- NO: Range: (0～1300/displayable value 6700)mg/m3; Resolution: 1mg/m3; Repeatability: ≤2.0%
- NO2: Range: (0～200/displayable value 2000)mg/m3; Resolution: 1mg/m3; Response time: ≤90s
- CO: Range: (0～5000/displayable value 25000)mg/m3; Resolution: 1mg/m3; Stability: within 1 hour
- CO2: Range: (0～20)%; Resolution: 0.01%; Change of indication value ≤5.0%
- H2S: Range: (0～300/displayable value 1500)mg/m3; Resolution: 1mg/m3
- Service life of flue gas sensor: about 3 years in the air
- Power supply: AC220V±10% 50Hz or DC12V (built-in)
- Noise: <50dB(A)
- Power consumption: <50W
- Machine weight: about 3kg
Package Included:
- 1 x Set of Flue Gas Analyzer
Payment Terms
1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
- For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding.
Return Terms
1. If you receive defective item, please kindly notify us within 14 days. We will guide you the returning instruction for replacement or refund.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
Custom Duties & Taxes
1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
Feedback
1. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
On Mar-14-21 at 21:13:17 PDT, seller added the following information: